Correct Operation Method Of Thread Winding Machine

Thread Winding Machine is a machine that winds a wire-like object onto a specific workpiece. The winding machine can be divided into simple type, semi-automatic type and fully automatic type according to the degree of automation. Electronic control methods include numerical control microcomputer single-chip microcomputer and IBM computer control. According to the installation method, it is classified into desktop and floor-standing machines.

The correct operation method of the Thread Winding Machine:

1. The environment in which the device is used

In order to improve the service life of the winding machine, it is generally required to avoid direct sunlight and other heat radiation, to avoid places that are too humid, too dusty or have corrosive gases, and the winding machine equipment should be kept away from equipment with large vibrations, such as punching machines , forging equipment, etc.

2. Good power guarantee

In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous interference signals, the winding machine equipment generally uses a dedicated line for power supply (such as dividing a channel from the low-voltage power distribution room for the use of CNC machine tools) or adding a voltage stabilizing device, etc. , can reduce the impact of power quality and electrical interference.

3. Formulate effective operating procedures

In terms of the use and management of the Thread Winding Machine, a series of practical and effective operating procedures should be formulated. For example, lubrication, maintenance, reasonable use and standardized shift system, etc., are the main contents of equipment use and management. Formulating and complying with operating procedures is one of the important measures to ensure safe operation. Practice has proved that many failures can be reduced by following the operating procedures.

4. The equipment should not be stored for a long time

After purchase, it should be fully utilized, especially in the first year of use, so that the weak links that are prone to failure are exposed as soon as possible, so that they can be eliminated during the warranty period. When there is no production task, the winding machine should also be powered on regularly, preferably Power on 1 or 2 times a week, and run dry for about 1 hour each time, so as to use the heat generated by the parts of the winding machine itself to reduce the humidity inside the machine, so that the electronic components will not be damp, and at the same time, it can also detect in time whether there is a low battery alarm. , to prevent loss of system setting parameters.